IOPS
From Wikipedia, the free encyclopedia
IOPS (Input/Output Operations Per Second, pronounced eye-ops) is a common performance measurement used to benchmark computer storage devices like hard disk drives (HDD), solid state drives (SSD), and storage area networks (SAN). As with any benchmark, IOPS numbers published by storage device manufacturers do not guarantee real-world application performance.[1][2]
IOPS can be measured with applications, such as Iometer (originally developed by Intel), as well as IOzone and FIO[3] and is primarily used with servers to find the best storage configuration.
The specific number of IOPS possible in any system configuration will vary greatly, depending upon the variables the tester enters into the program, including the balance of read and write operations, the mix of sequential and random access patterns, the number of worker threads and queue depth, as well as the data block sizes.[1] There are other factors which can also affect the IOPS results including the system setup, storage drivers, OS background operations, etc. Also, when testing SSDs in particular, there are preconditioning considerations that must be taken into account.[4]
Contents
Performance characteristics
Random access compared to sequential access.
The most common performance characteristics measured are sequential and random operations. Sequential operations access locations on the storage device in a contiguous manner and are generally associated with large data transfer sizes, e.g., 128 KB. Random operations access locations on the storage device in a non-contiguous manner and are generally associated with small data transfer sizes, e.g., 4 KB.
The most common performance characteristics are as follows:
| Measurement | Description |
| Total IOPS | Total number of I/O operations per second (when performing a mix of read and write tests) |
| Random Read IOPS | Average number of random read I/O operations per second |
| Random Write IOPS | Average number of random write I/O operations per second |
| Sequential Read IOPS | Average number of sequential read I/O operations per second |
| Sequential Write IOPS | Average number of sequential write I/O operations per second |
For HDDs and similar electromechanical storage devices, the random IOPS numbers are primarily dependent upon the storage device's random seek time, whereas for SSDs and similar solid state storage devices, the random IOPS numbers are primarily dependent upon the storage device's internal controller and memory interface speeds. On both types of storage devices the sequential IOPS numbers (especially when using a large block size) typically indicate the maximum sustained bandwidth that the storage device can handle.[1] Often sequential IOPS are reported as a simple MB/s number as follows:
(with the answer typically converted to MegabytesPerSec)
Some HDDs will improve in performance as the number of outstanding IO's (i.e. queue depth) increases. This is usually the result of more advanced controller logic on the drive performing command queuing and reordering commonly called either Tagged Command Queuing (TCQ) or Native Command Queuing (NCQ). Most commodity SATA drives either cannot do this, or their implementation is so poor that no performance benefit can be seen.[citation needed] Enterprise class SATA drives, such as the Western Digital Raptor and Seagate Barracuda NL will improve by nearly 100% with deep queues.[5] High-end SCSI drives more commonly found in servers, generally show much greater improvement, with the Seagate Savvio exceeding 400 IOPS—more than doubling its performance.[citation needed]
While traditional HDDs have about the same IOPS for read and write operations, most NAND flash-based SSDs are much slower writing than reading due to the inability to rewrite directly into a previously written location forcing a procedure called garbage collection.[6][7][8] This has caused hardware test sites to start to provide independently measured results when testing IOPS performance.
Newer flash SSD drives such as the Intel X25-E have much higher IOPS than traditional hard disk drives. In a test done by Xssist, using IOmeter, 4 KB random transfers, 70/30 read/write ratio, queue depth 4, the IOPS delivered by the Intel X25-E 64 GB G1 started around 10000 IOPs, and dropped sharply after 8 minutes to 4000 IOPS, and continued to decrease gradually for the next 42 minutes. IOPS vary between 3000 to 4000 from around the 50th minutes onwards for the rest of the 8+ hours test run.[9] Even with the drop in random IOPS after the 50th minute, the X25-E still has much higher IOPS compared to traditional hard disk drives. Some SSDs, including the OCZ RevoDrive 3 x2 PCIe using the SandForce controller, have shown much higher sustained write performance that more closely matches the read speed.[10]
Examples
Mechanical hard drives
Some commonly accepted averages for random IO operations, calculated as 1/(seek + latency) = IOPS:
| Device | Type | IOPS | Interface | Notes |
| ~75-100 IOPS[2] | SATA 3 Gbit/s | |||
| 10,000 rpm SATA drives | HDD | ~125-150 IOPS[2] | SATA 3 Gbit/s | |
| 10,000 rpm SAS drives | HDD | ~140 IOPS[2] | SAS | |
| 15,000 rpm SAS drives | HDD | ~175-210 IOPS[2] | SAS |
Solid-state devices
| Device | Type | IOPS | Interface | Notes |
| ~8,600 IOPS[11] | SATA 3 Gbit/s | Intel's data sheet[12] claims 6,600/8,600 IOPS (80 GB/160 GB version) and 35,000 IOPS for random 4 KB writes and reads, respectively. | ||
| Intel X25-E (SLC) | SSD | ~5,000 IOPS[13] | SATA 3 Gbit/s | Intel's data sheet[14] claims 3,300 IOPS and 35,000 IOPS for writes and reads, respectively. 5,000 IOPS are measured for a mix. Intel X25-E G1 has around 3 times higher IOPS compared to the Intel X25-M G2.[15] |
| G.Skill Phoenix Pro | SSD | ~20,000 IOPS[16] | SATA 3 Gbit/s | SandForce-1200 based SSD drives with enhanced firmware, states up to 50,000 IOPS, but benchmarking shows for this particular drive ~25,000 IOPS for random read and ~15,000 IOPS for random write.[16] |
| OCZ Vertex 3 | SSD | Up to 60,000 IOPS[17] | SATA 6 Gbit/s | Random Write 4 KB (Aligned) |
| Corsair Force Series GT | SSD | Up to 85,000 IOPS[18] | SATA 6 Gbit/s | 240 GB Drive, 555 MB/s sequential read & 525 MB/s sequential write, Random Write 4 KB Test (Aligned) |
| Samsung SSD 850 PRO | SSD | 100,000 read IOPS | SATA 6 Gbit/s | 4 KB aligned random I/O at QD32 |
| OCZ Vertex 4 | SSD | Up to 120,000 IOPS[20] | SATA 6 Gbit/s | 256 GB Drive, 560 MB/s sequential read & 510 MB/s sequential write, Random Read 4 KB Test 90K IOPS, Random Write 4 KB Test 85K IOPS |
| (IBM) Texas Memory Systems RamSan-20 | SSD | 120,000+ Random Read/Write IOPS[21] | Includes RAM cache | |
| Fusion-io ioDrive | SSD | 140,000 Read IOPS, 135,000 Write IOPS[22] | PCIe | |
| Virident Systems tachIOn | SSD | 320,000 sustained READ IOPS using 4KB blocks and 200,000 sustained WRITE IOPS using 4KB blocks[23] | PCIe | |
| OCZ RevoDrive 3 X2 | SSD | 200,000 Random Write 4K IOPS[24] | PCIe | |
| Fusion-io ioDrive Duo | SSD | 250,000+ IOPS[25] | PCIe | |
| Violin Memory Violin 3200 | SSD | 250,000+ Random Read/Write IOPS[26] | PCIe /FC/Infiniband/iSCSI | Flash Memory Array |
| WHIPTAIL, ACCELA | SSD | 250,000/200,000+ Write/Read IOPS[27] | Fibre Channel, iSCSI, Infiniband/SRP, NFS, CIFS | Flash Based Storage Array |
| DDRdrive X1, | SSD | 300,000+ (512B Random Read IOPS) and 200,000+ (512B Random Write IOPS)[28][29][30][31] | PCIe | |
| SolidFire SF3010/SF6010 | SSD | 250,000 4KB Read/Write IOPS[32] | iSCSI | Flash Based Storage Array (5RU) |
| (IBM) Texas Memory Systems RamSan-720 Appliance | FLASH/DRAM | 500,000 Optimal Read, 250,000 Optimal Write 4KB IOPS[33] | FC / InfiniBand | |
| OCZ Single SuperScale Z-Drive R4 PCI-Express SSD | SSD | Up to 500,000 IOPS[34] | PCIe | |
| WHIPTAIL, INVICTA | SSD | 650,000/550,000+ Read/Write IOPS[35] | Fibre Channel, iSCSI, Infiniband/SRP, NFS | Flash Based Storage Array |
| Violin Memory Violin 6000 | 3RU Flash Memory Array | 1,000,000+ Random Read/Write IOPS[36] | /FC/Infiniband/10Gb(iSCSI)/ PCIe | |
| (IBM) Texas Memory Systems RamSan-630 Appliance | Flash/DRAM | 1,000,000+ 4KB Random Read/Write IOPS[37] | FC / InfiniBand | |
| IBM FlashSystem 840 | Flash/DRAM | 1,100,000+ 4KB Random Read/600,000 4KB Write IOPS[38] | 8G FC / 16G FC / 10G FCoE / InfiniBand | Modular 2U Storage Shelf - 4TB-48TB |
| Fusion-io ioDrive Octal (single PCI Express card) | SSD | 1,180,000+ Random Read/Write IOPS[39] | PCIe | |
| OCZ 2x SuperScale Z-Drive R4 PCI-Express SSD | SSD | Up to 1,200,000 IOPS[34] | PCIe | |
| (IBM)Texas Memory Systems RamSan-70 | Flash/DRAM | 1,200,000 Random Read/Write IOPS[40] | PCIe | Includes RAM cache |
| Kaminario K2 | Flash/DRAM/Hybrid SSD | Up to 1,200,000 IOPS SPC-1 IOPS with the K2-D (DRAM)[41][42] | ||
| NetApp FAS6240 cluster | Flash/Disk | 1,261,145 SPECsfs2008 nfsv3 IOPs using 1,440 15K disks, across 60 shelves, with virtual storage tiering.[43] | NFS, CIFS, FC, FCoE, iSCSI | SPECsfs2008 is the latest version of the Standard Performance Evaluation Corporation benchmark suite measuring file server throughput and response time, providing a standardized method for comparing performance across different vendor platforms. http://www.spec.org/sfs2008. |
| Fusion-io ioDrive2 | SSD | Up to 9,608,000 IOPS[44] | PCIe | Only via demonstration so far. |
No comments:
Post a Comment